Direct light recessed light fitting, suitable for installation on stave false ceilings.

Standard

BODY:

sheet-steel body (6/10) painted with white (RAL 9003) epoxy powders thermosetting at 180°C, with degreasing, phosphatization and washing treatment. The ligth fitting is equipped with inside gaskets and guarantees the partial protection against dust and water splashing either in the optical hollow or in the recessed part, so it is particularly indicated to be used in
chemical laboratories, hospital rooms and operating theatres… The light fitting is equipped with fixing accessories.

OPTICAL GROUP:

IP54 plane optics, fit in a white aluminium frame, available in the following versions: PPD prismatic polycarbonate, POL opal polycarbonate and VZG knurled tempered glass. For all environments that require a low luminance, versions with transparent glass and darklight lamellar optics, in (VTR+DL90) matt aluminium and (VTR+DL99) antiridescent polished aluminium are available on request.

WIRING:

feeding 230V/50Hz with rigid cable (section: 0,50 mmq) and PVC-HT sheathing resistant at 90°C according to CEI 20-20 directives. Terminal
board 2P+T with maximum wire section allowed 2,5 mmq. Polycarbonate lamp holder and phosphorous bronze contacts. Insulation class I.
It is suitable to be installed on normally inflammable surfaces.
— CNR-F version with electromechanical ballast EEI=B2, protection fuse, starter ignition and power factor correction capacitor;
— CEL-F version with electronic ballast EEI=A2, 230V 50 Hz, protection fuse, heat ignition, power factor 0,98;
— CNR-FE and CEL-FE emergency versions with emergency group connected with an always functioning lamp in SA mode (always on): in case of  black-out or feeding shortness the neon connected to the emergency kit keeps working. Duration: 60 minutes, Ni/Cd battery, time to recharge
24 hours.

LAMPS:

FL T26 linear fluorescent lamp, lamp coupling G13.

REGULATIONS:

light fitting in conformity with:
EN 60598, electric security
EN 55015, EN 61000 electromagnetic compatibility
EN 60529, protection degree
EN 12464, low luminance

ACCESSORIES:

DIMENSIONS

INSTALLATION DETAILS