Standard

On request

BODY:

sheet-steel body (6/10) painted with grey epoxy powders thermosetting at 180°C, with degreasing, phosphatization and washing treatment. Resting installation on the false ceiling structure; it does not need fixing brackets.

OPTICAL GROUP:

upper reflector with parabolic profile in white prepainted aluminium fit in the apparatus without using tools in order to facilitate the maintenance operations. STB lower diffuser jutting out of the body, realized in stretched sheet-steel, painted with grey colour, furnished with inside antidazzle opal polycarbonate diffuser.

WIRING:

feeding 230V/50Hz with rigid cable (section: 0,50 mm2) and PVC-HT sheathing resistant at 90°C according to CEI 20-20 directives. Terminal board 2P+T with maximum wire section allowed 2,5 mmQ. Polycarbonate lamp holder and phosphorous bronze contacts. Insulation class I.
It is suitable to be installed on normally inflammable surfaces. Rapid connection: the electrical connection can be effected without releasing the optical group or using tools.
— CEL version with electronic ballast EEI=A2, 230V 50Hz, heat ignition, power factor 0,98;
— CED version with dimmable electronic ballast (1-10V) EEI=A1, 230V 50Hz, heat ignition, power factor 0,96;
— CEL-E and CED-E emergency versions with emergency group, connected with an always functioning lamp in SA mode (always on):
in case of black-out or feeding shortness the neon connected to the emergency kit keeps working. Duration: 60 minutes, Ni/Cd battery, time to recharge 24 hours.

LAMPS:

FL-C 36W compact fluorescent lamps, lamp coupling 2G10, installed in the apparatus. Triphosphorus powders 4000K lamps, with excellent chromatic yield (Ra>80).

REGULATIONS:

light fitting in conformity with:
EN 60598, electric security
EN 55015, EN 61000 electromagnetic compatibility
EN 60529, protection degree.

ACCESSORIES:

N.4 fixing brackets furnished with screws.
cod. KF1
 

DIMENSIONS

INSTALLATION DETAILS