Ceiling mounting reflected light apparatus with innovative design and soft lines.

Standard

BODY:

sheet-steel body (6/10) painted with grey epoxy powders thermosetting at 180°C, with degreasing, phosphatization and washing treatment. Ceiling installation, quick and simple, obtained by hooking the body with the fixing
accessories furnished with the light fitting. The installation does not need any tool and allows to space the apparatus out of the ceiling for about 70 mm.

OPTICAL GROUP:

FRB optics, composed by:
— upper reflector with parabolic profile in white prepainted aluminium fit in the light fitting without using tools in order to facilitate maintenance operations;
— lower diffuser jutting out of the body, realized in perforated steel,  painted with grey colour, furnished with inside antidazzle opal polycarbonate diffuser.

WIRING:

feeding 230V/50Hz with rigid cable (section: 0,50 mmq) and PVC-HT sheathing resistant at 90°C according to CEI 20-20 directives. Terminal
board 2P+T with maximum wire section allowed 2,5 mmq. Polycarbonate lamp holder and phosphorous bronze contacts. Insulation class I. It is suitable to be installed on normally inflammable surfaces. Rapid connection: the electrical connection can be effected without releasing the optical group or using tools.
— CEL version with electronic ballast EEI=A2, 230V 50Hz, heat ignition, power factor 0,99;
— CED version with dimmable electronic ballast (1-10V) EEI=A1, 230V 50Hz, heat ignition, power factor 0,96.

LAMPS:

FL T16 linear fluorescent lamps, lamp coupling G5, installed in the light fitting. Triphosphorus 4000K lamps, with excellent chromatic yield (Ra>80).

REGULATIONS:

light fitting in conformity with:
EN 60598, electric security
EN 55015, EN 61000 electromagnetic compatibility
EN 60529, protection degree.
 

DIMENSIONS

INSTALLATION DETAILS